Percent Increase and Decrease Quiz
103+ results
Filters
Grade
Subject
Format
Resource type
Standard
Language
Programs & methods
Design a Environmental Solution Engineering Challenge
There are a number of ways that humans are decreasing the biodiversity on Earth. Some of these processes are deforestation, habitat loss, salinization, urban runoff, air pollution, and water pollution. In this engineering challenge, students are asked to work in collaborative groups to design a solution to one of these problems, effectively increasing the biodiversity of the area. The engineering design process will guide groups through the creation of a prototype to address and fix the issue t
9th - 12th
Biology, Engineering, Environment
NGSS
HS-LS2-7
Drone Racing Challenge | Speed, Time & Distance Lab + App Simulation + Auto Quiz
Get ready for takeoff! In this revolutionary, app-powered physics lab, students explore the relationship between speed, distance, and time through a high-stakes drone racing challenge. Using a downloadable HTML simulation app (no install or login needed, works on any device: f or iPad devices, first download the free Documents app from the App Store then download and open this App.), learners compare average and instantaneous speed, analyze motion graphs, and test race strategies. This lesson
7th - 12th
Engineering, General Science, Physics
Bridge Building STEAM Challenge | Engineering Design & Forces Project
Bring real-world engineering into your classroom with this engaging STEAM Bridge Building Challenge Project. This hands-on STEAM design task guides students through the full engineering design process: plan โ design โ build โ test โ reflect, helping them think like real engineers. Students investigate how forces such as compression and tension act on structures, explore different bridge types (beam, arch, truss, suspension), and apply scientific knowledge to design and construct a bridge capabl
7th - 10th
Engineering, General Science, Physics
IPv4-Header | CCNA 200-301 Prep and Networking Lessons
This lesson is on IPv4 Header. Ideal for ICT, Computer Science, Networking, or certification prep (CCNA, CCNP, or CompTIA Network+), it explains the structure and purpose of the IPv4 packet header, detailing each field and its role in data transmission. The lesson helps learners understand how information such as source and destination addresses, TTL (Time to Live), and protocol type work together to ensure accurate and efficient delivery of data across IP networks. โโโโโโโโโโโโโโโโโโโโ
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in:ย The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
Football Concussion Science: Egg-Helmet Engineering Lab (Forces & Impulse)
Tired of abstract lectures about momentum and concussions that students forget by the next day? Picture your class building, testing, and iterating real prototypes while applying Force, Impulse, and energy-transfer principles โ and actually understanding why helmet design changed over the last 60 years. You know that moment when a physics topic becomes nothing more than symbols on the board? This engineering lab flips that script: students design an egg "helmet," collect drop-test data, analyz
7th - 10th
Engineering, General Science, Physics
Also included in:ย Middle School Science STEM Activities Bundle | Grades 4-8
Introduction to the Cisco IOS CLI | CCNA 200-301 Prep and Networking Lessons
This lesson is on Introduction to the Cisco IOS CLI. Ideal for ICT, Computer Science, Networking, or certification prep (CCNA, CCNP, or CompTIA Network+), it introduces learners to the Cisco Internetwork Operating System (IOS) and its Command-Line Interface (CLI). The lesson covers essential navigation commands, user modes, and configuration techniques, helping students gain confidence in interacting with Cisco devices, managing network settings, and performing basic troubleshooting task
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in:ย The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
Roller Coaster Project - Energy, Force, and Motion
Students explore energy, force, motion, potential energy, kinetic energy, gravity, friction, unbalanced and balanced forces with this project based learning activity. Includes a reading passage, flash cards, a quiz quick check, project build day guideline, and draft page for a roller coaster.
1st - 12th
Engineering, General Science, Physics
Space Exploration: October Sky & Rocket Boys (The Science Behind the Story)
A teacher/student guide to use with the novel October Sky/Rocket Boys written by Homer Hickam. Includes pre-reading questions, chapter by chapter vocabulary, science concepts and discussion questions. Also includes a 35 question quiz to use after reading the novel (multiple choice, matching and short answer questions).
I use this guide for with my students while we read the novel aloud in class. We also watch the movie after completing the novel to compare the similarities and differences
5th - 10th
Astronomy, Earth Sciences, Engineering
Acceleration & Free Fall Lab โ Skydiving Simulation + Graphs + Auto-Graded Quiz
Dive into real physics with this skydiving-themed lab on acceleration and free fall! Using a downloadable HTML simulation app (no install or login required, works on any device, For iPad devices, first download the free Documents app from the App Store then download and open this App), students predict, graph, and explain how motion changes as a skydiver jumps from a plane and falls toward Earth. With a blend of interactive visuals, data-driven inquiry, and puzzle-based learning, this lab t
7th - 12th
Engineering, General Science, Physics
Demystifying STEM: Using what you already have
STEM education efforts seek to increase student curiosity in and engagement with science, technology, engineering, and mathematics. It is a fact that science, math, technology, and engineering interrelate with each other all the time. It is difficult to teach one without involving one or more of the others. This book consists of four units with 24 STEM activities that have been developed around the studentโs lifestyle and role at home, school, and in the community. For each unit, the instr
K - 12th
Engineering, Other (Math), Other (Science)
Ping Pong Ball Launcher Project and Rubric
This project combines the mathematics of slope with percent grade and angle of elevation. Then, students apply the science process of engineering to design and tinker with a launcher that demonstrates the physics of projectiles and parabolic curves.
I am using this project during my linear equations in two variables unit to re-enforce the concept of slope and make connections to right triangle trig - Tangent. The next unit for my students is functions and we study linear, quadratic, and expon
8th - 10th
Algebra, Engineering, Geometry
Build A Car STEM
This interactive STEM challenge requires students to plan and design their own race car and then to test the speed of their cars by sending them down a homemade ramp. The students are given the opportunity to revise their design and retest to see if there improvement increased the speed of their car. The students then reflect on their design.
Materials needed:
Timers
Cardboard (for ramp)
Textbooks (for ramp)
Toilet paper rolls
Plastic Water bottle and cap
2 or 3 oz plastic cups with l
1st - 10th
Engineering, Math, Science
Submarine Density Engineering Lab โ Ballast Tank Design
This engineering challenge takes the complex physics of buoyancy and turns it into a hands-on mechanical system. By manipulating air volume with a syringe, students act as "ballast control officers," gaining a concrete understanding of how density dictates whether an object defies or succumbs to gravity in a fluid. Activity DescriptionBuild a Submarine is a premier STEM engineering lab that focuses on Archimedes' Principle and Density Control. Unlike static sink-or-float activities, this lab r
5th - 12th
Engineering, Physical Science, Physics
Also included in:ย Scientific Method and Measurement Skill Labs Bundle
Architecture: Bedroom Design Unit Mega-Bundle
Scalable Architecture Packet and Floor Plan Project with Answer Keys and Supplemental Practice Worksheets, Quiz and Instructions (30 pages)PLUS Classroom Enhancements: Posters (8.5 x 11), Table-Top Menu and Architecture CashAn 8th Grade Favorite! This is an in-depth fantastic project for 8th graders that can be adjusted to span 1 to 8 weeks (and possibly even longer). It is tested and super scalable. Students will redesign their own bedroom from concept to implementation. When finished with the
7th - 10th, Adult Education
Engineering, Geometry, Visual Arts
3D Winter Art: Q-Tip Snowflakes | STEAM Lesson on Radial Balance
This fun 1 day, low-prep ART lesson teaches radial balance and 6-sided symmetry through a hands-on building snowflake craft activity that includes visual guided Google Slides, along with a printable exit quiz. This Radial Balance Snowflake STEAM - ART lesson teaches students the principles of radial balance symmetry and 3D sculpture while integrating a fascinating science video about how crystals form in nature. Using only Q-tips, glue, and a dash of glitter, your students will create stunnin
2nd - 9th
Engineering, Environment, Visual Arts
Profile Boats: A hands-on boat-building STEM project
Using hands-on activities to teach students math and science concepts engages their senses and increases their understanding and ability to learn. Building small boats is one exercise that can be both fun and educational. This project is designed to teach students math and science objectives, help them develop team-building skills, and provide practical experience building and paddling their own pram, which is a boat similar to a kayak but with squared ends. Additionally, this activity allows st
8th - 10th
Engineering, Science
Project Based Learning Assessment- Urban Heat Levels Website Design Challenge
A Project Based Learning assessment designed to teach the concepts of heat transfer (conduction, convection and radiation) using the real world issue of increasing urban heat levels. The end product is a website. This project is meant to be used as a project based learning activity where students generate their knowledge and skills through engaging projects based on real world challenges. I have used this project in my own classroom and found my students becoming very engaged in its real world
7th - 12th, Higher Education
Earth Sciences, Engineering, Science
Lego Mindstorms EV3 Resources
These are teacher made resources to go with the Lego Mindstorms EV-3 robotics set. It includes a rubric for grading, a Project Planning Sheet, and a Vocabulary Matching Quiz. I used this for my special education High School level computer class. Thanks for viewing!
4th - 12th, Higher Education
Computer Science - Technology, Engineering, Robotics
Pi-Day Catapult โ Optimize Angle & Tension (Predict vs. Measure) | MSโHS NGSS
Description (NGSS included) Celebrate Pi-Day with a data-driven projectile challenge! Students tune angle and tension on a simple launcher, then predict vs. measure range and compute percent error. Teams graph Range vs. Angle (and optional Range vs. Pullback) and explain results with CER. ๐ง ๐ ๐ฌ Investigate: hold one variable constant to fairly test the other. ๐งฎ Model: use a calibration shot or R โ (vยฒยทsin(2ฮธ))/g to predict. ๐ Analyze: compare predicted vs. measured; percent error
3rd - 12th
Engineering, General Science, Physics
Eco Smart Investigation Renewable Resources STEM Project
A six week STEM project developed to investigate different types of renewable resources. It includes 3 plans for working models of a small wind turbine, a solar oven and a hydroelectic dam. It also includes guidelines for a goolge slide presentation with rubric and 4 teacher google slide presentations (need to download for free on my site) with quiz questions for each with answers. It also includes a unit test with DOK 3 and 4 questions. Perfect for a STEM class and takes 6 weeks to complete.
7th - 12th
Engineering, Other (Science), Science
OLD HANDS, NEW TOOLS - A DESIGN CHALLENGE PROJECT
This design brief was developed as an application challenge for students following a unit on simple machines. Students will be expected to identify the location of the resistance and the effort on their selected tools, as well as a method to alter the tool, thereby increasing its mechanical advantage.
7th - 10th
Engineering, Physics
CCSS, NGSS
RST.6-8.3
, RST.6-8.4
, RST.6-8.7
ย +18
Also included in:ย Design Challenge Bundle - Force and Motion (Projects)
Primary Productivity Project
This group project is a creative way to talk about primary productivity, sustainability, or engineering with your students. This activity usually takes my students two 90 minute periods to create, and students generally enjoy thinking about how future Earth might be, and how they could solve future problems. The scenario presented is a future Earth (2079) reaching carrying capacity of 11 billion people. The task for each group: they must come up with a plan with how to increase primary produc
8th - 12th
Biology, Earth Sciences, Engineering
Intro to Cybersecurity
โก READY TO TEACH โ no prep needed. Pick this up Sunday, teach it Monday. This complete lesson pack introduces students to the foundations of cybersecurity through the CIA Triad, real-world threat analysis, and the Equifax 2017 data breach case study. ๐ฆ WHAT'S INCLUDED (4 files) โ
Student Worksheet + Answer Key (PDF) Real-world hands-on activities including CIA Triad analysis, threat matching, and a guided Equifax case study. Full answer key included. โ
20-Point Quiz + Answer Key (PDF) 10 multip
6th - 12th, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in:ย Cybersecurity Hands-On Series | COMPLETE BUNDLE | 42 Files | Grades 9-12
Subnetting Part 3 | CCNA 200-301 Prep and Networking Lessons
Take your studentsโ subnetting skills to the next level with Subnetting โ Part 3, the final lesson in the subnetting series! This resource introduces Class A network subnetting, explains VLSM (Variable-Length Subnet Masks), and includes quiz answers + extra practice resources for mastery and confidence. โโโโโโโโโโโโโโโโโโโโโโโโ What Students Will LearnAnswers to Subnetting (Part 3)quiz questionsSubnetting Class A networksVLSM (Variable-Length Subnet Masks)Extra subnetting practice resourcesโ
10th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in:ย The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
Showing 1-24 of 103+ results
TPT is the largest marketplace for PreK-12 resources, powered by a community of educators.
IXL family of brands