Percent Increase and Decrease Quiz
150+ results
Filters
Grade
Subject
Format
Resource type
Standard
Theme
Language
Programs & methods
Supports
Working Lung Model Engineering Lab — Boyle's Law & Breathing
This lab uses the principles of Boyle’s Law to demonstrate how the human body manipulates air pressure to sustain life. It is one of the most effective ways to visualize a process that happens internally and invisibly every few seconds. Activity DescriptionThe Working Lung Model is a physical simulation of the thoracic cavity. By pulling on the bottom balloon (the diaphragm), students increase the volume inside the cup (the chest). This creates a vacuum (low pressure), forcing outside air to
5th - 9th
Anatomy, Biology, Engineering
Also included in: Human Body Systems Bundle
Robot Memory Counter | Interactive Logic & Game Systems | Micro:bit Simulator
🚀 Activity 3/5 – Cluster 4: Interactive Logic & Game Systems ✔ No hardware required — uses the free Microsoft MakeCode micro:bit simulator ✔ No prior coding experience required ✔ Step-by-step guided lesson ✔ Designed for classroom success 🤖 Robot Memory Counter | Micro:bit Coding Activity | Interactive Logic Systems | STEM Lesson (Grades 4–7)🌟 THIRD ACTIVITY in Cluster 4 – BUILD MEMORY-BASED ROBOT SYSTEMS In this engaging micro:bit coding activity, students take the next step in robotics
4th - 7th
Computer Science - Technology, Engineering, Robotics
NGSS
MS-ETS1-4
, 3-5-ETS1-1
, MS-ETS1-1
+1
Bobsled Drag Design Challenge: Aerodynamics, Graphing & Percent Change (6-8)
👉 This activity is part of the Winter Olympics STEM Bundle. Grab the full unit and save $4.25Bobsled Drag Design Challenge (Grades 6–8) Your students are about to do real engineering, the kind that makes them forget to ask, “Is this graded?” In this Winter Olympics inspired STEM challenge, teams design a cardstock bobsled shell to reduce aerodynamic drag, then run a simple pull test to collect data, graph results, calculate percent change, and defend the best design using CER (Claim, Evide
6th - 8th
Engineering, Graphing, Other (Science)
CCSS, NGSS
6.SP.B.4
, 6.SP.B.5
, 6.RP.A.3
+7
Electricity & Electromagnets: Circuits, Conductors, Series/Parallel + Quizzes
Make teaching electricity and magnetism simple and engaging with this hands-on resource! Perfect for Grades 4–6, this package introduces students to electricity, simple circuits, conductors and insulators, series vs. parallel circuits, and electromagnets in a clear and accessible way. To run the experiments, students will need: a battery, wires with clips, small light bulbs, a switch (optional), various test materials (metal/plastic/wood), an iron nail, and copper wire. Students build real circu
4th - 6th
Engineering, General Science, Physics
Bridge Building STEAM Challenge | Engineering Design & Forces Project
Bring real-world engineering into your classroom with this engaging STEAM Bridge Building Challenge Project. This hands-on STEAM design task guides students through the full engineering design process: plan → design → build → test → reflect, helping them think like real engineers. Students investigate how forces such as compression and tension act on structures, explore different bridge types (beam, arch, truss, suspension), and apply scientific knowledge to design and construct a bridge capabl
7th - 10th
Engineering, General Science, Physics
Roller Coaster Project - Energy, Force, and Motion
Students explore energy, force, motion, potential energy, kinetic energy, gravity, friction, unbalanced and balanced forces with this project based learning activity. Includes a reading passage, flash cards, a quiz quick check, project build day guideline, and draft page for a roller coaster.
1st - 12th
Engineering, General Science, Physics
Maglev Technology Quiz
Magnetic LevitationQuiz (Beginner Level)Great beginner quiz when introducing Maglev Technology This is a 10 question quiz covering the very basics of magnetic levitation. This is a perfect quiz to add to our Maglev Technology Project or Maglev Technology Packet. PDF includes: (1) 2-sided Quiz (1) Answer Ke All Answer Keys Included. (Most of these worksheets are student specific so answers (sketches) will vary) Tested for 8th graders after reading and reviewing the Maglev Technology Packet. Magle
5th - 9th
Engineering
Also included in: Maglev Unit Enhancement Bundle
Architecture Quiz
This is a 10 question Architecture Quiz covering many aspects of the Architectural Unit available in our store. It is based on reading a simple floor plan and answering questions about symbols, square footage, square yardage and measurements. Answer Key provided. Architecture Unit and other Architecture worksheets available in our store. Click the link to explore more: https://www.teacherspayteachers.com/store/the-creative-steam-zoneQuestions or comments welcome at thecreativesteamzone@protonma
7th - 12th, Adult Education
Engineering, Geometry, Visual Arts
Also included in: Architecture: Bedroom Design Unit Mega-Bundle
PLTW Automation Robotics Flash Cards
Hardware and Gear Flashcards for PLTW Automation Robotics. 20 flashcards. Allows students to review materials prior to building. Group study before a quiz. Bell Ringer activity before starting a new build. VEX based.
6th - 8th
Computer Science - Technology, Engineering, Robotics
STEM Challenge Cards – 48 Hands-On Engineering Projects for Middle School
Bring creativity and problem-solving to life with this set of 48 STEM Challenge Cards designed for upper elementary and middle school students! Each challenge invites students to think like engineers — designing, testing, and improving their builds using everyday materials. These low-prep, high-engagement activities are perfect for fostering collaboration, critical thinking, and real-world engineering skills. Each Challenge Card Includes: Goal: A clear objective to guide student work. Numbere
4th - 8th
Engineering, General Science, Other (Science)
NGSS
MS-ETS1-2
, 3-5-ETS1-3
, MS-ETS1-4
+4
Submarine Density Engineering Lab — Ballast Tank Design
This engineering challenge takes the complex physics of buoyancy and turns it into a hands-on mechanical system. By manipulating air volume with a syringe, students act as "ballast control officers," gaining a concrete understanding of how density dictates whether an object defies or succumbs to gravity in a fluid. Activity DescriptionBuild a Submarine is a premier STEM engineering lab that focuses on Archimedes' Principle and Density Control. Unlike static sink-or-float activities, this lab r
5th - 12th
Engineering, Physical Science, Physics
Also included in: Scientific Method and Measurement Skill Labs Bundle
3D Winter Art: Q-Tip Snowflakes | STEAM Lesson on Radial Balance
This fun 1 day, low-prep ART lesson teaches radial balance and 6-sided symmetry through a hands-on building snowflake craft activity that includes visual guided Google Slides, along with a printable exit quiz. This Radial Balance Snowflake STEAM - ART lesson teaches students the principles of radial balance symmetry and 3D sculpture while integrating a fascinating science video about how crystals form in nature. Using only Q-tips, glue, and a dash of glitter, your students will create stunnin
2nd - 9th
Engineering, Environment, Visual Arts
Viewing Guide: Animatronics
This activity was designed with 8th-grade Middle School students in mind as a way to activate and increase their background knowledge on the topic of Animatronics, as well as their scientific vocabulary in this field. It can easily be adapted to a 6th-grade group by reducing its length and complexity by half (ie. include only two parts, A and B, instead of three; cut down the number of blanks to 10-11, instead of 22). For a 7th-grade class, I would recommend finding a middle ground. Studen
6th - 8th
Engineering, Visual Arts, Vocabulary
Pi-Day Catapult — Optimize Angle & Tension (Predict vs. Measure) | MS–HS NGSS
Description (NGSS included) Celebrate Pi-Day with a data-driven projectile challenge! Students tune angle and tension on a simple launcher, then predict vs. measure range and compute percent error. Teams graph Range vs. Angle (and optional Range vs. Pullback) and explain results with CER. 🧠📈 🔬 Investigate: hold one variable constant to fairly test the other. 🧮 Model: use a calibration shot or R ≈ (v²·sin(2θ))/g to predict. 📊 Analyze: compare predicted vs. measured; percent error
3rd - 12th
Engineering, General Science, Physics
Bottle Cap Project in Onshape: Complete CAD Lesson with Teacher Resources
This is a beginner-to-intermediate CAD project where learners design a realistic Fanta Orange bottle cap in Onshape. It includes a step-by-step project guide, a teacher’s guide with pacing and built-in checks, a student quiz with answer key, poster-style visuals, and classroom-ready cheat sheets. Students will model the ridged edges that give the cap strength and grip, loft smooth transitions between profiles, shell the cap for lightweight functionality, and apply a branded decal for an authenti
5th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Robotics
Lofted Vase Project in Onshape: Complete CAD Lesson with Teacher Resources
This is a beginner-friendly CAD project where students design, loft, and shell a geometric vase using Onshape. It includes a step-by-step project guide, a comprehensive teacher’s guide with instructional support and built-in formative checks, a student quiz with answer key, a direct link to the Onshape file, and more. The project is designed to mirror how professional designers think: students learn to define geometry with constraints, structure their design using offset planes, and generate for
6th - 12th
Computer Science - Technology, Engineering, Robotics
2x4 Brick Project in Onshape: Complete CAD Lesson with Teacher Resources
This is a beginner-friendly CAD project where learners model a classic 2×4 brick in Onshape—then level up with an advanced 4×4 plate challenge. The resource includes a step-by-step project guide, a teacher’s guide with pacing and checks for understanding, a student quiz with answer key, poster-style visuals, and classroom-ready cheat sheets. Students practice professional habits: sketching with constraints, patterning repeated features, shelling for realistic wall thickness, and mirroring for
5th - 12th, Adult Education, Higher Education
Engineering, Physics
RA 10.11 Automated Agriculture & Precision Farming
RA 10.11 Automated Agriculture & Precision Farming GPS-Guided Tractors, Agricultural Drones & The Future of Smart Farming STEM • CTE • NGSS • Agricultural EngineeringHelp students explore how automation, data analytics, GPS technology, drones, and smart farming systems are transforming modern agriculture. In this highly engaging engineering lesson, students investigate how agricultural engineers use automated systems to increase productivity, improve sustainability, conserve resources, and suppo
7th - 10th
Computer Science - Technology, Engineering, General Science
NGSS
HS-ETS1-3
, MS-ETS1-1
, MS-ETS1-3
+1
FLIGHT GRADE 6 SCIENCE BUNDLE(ONTARIO CURRICULUM ALIGNED)
Flight – Grade 6 Science Unit (Ontario Curriculum) This ready-to-use workbook and lesson package covers the Ontario Grade 6 Science unit on Flight. With detailed lessons, relatable images, hands-on activities, and class discussion questions, students explore the properties of air, the four forces of flight, and real-world applications in aviation. Perfect for classrooms, homeschooling, or enrichment, this unit includes quizzes, a final test, vocabulary lists, and answer keys to support teac
6th - 8th
Engineering, Physics, Science of Reading
Also included in: GRADE 6 SCIENCE BUNDLE(BIODIVERSITY,FLIGHT,ELECTRICITY,SPACE)
STEM Investigation – Falling Cones & Aerodynamics
Title: 💡 STEM Investigation – Falling Cones Summary: Students explore how mass and cone shape affect falling speed by dropping paper circles and cones from a consistent height. They test flat circles, standard cones (~100°), double cones, and cones with wide (~20°) and narrow (~260°) angles. Observations show that flat circles fall slowest due to high air resistance, standard cones fall faster, double cones fall fastest due to increased mass, and cone angle affects drag—narrow cones fall quick
6th - 10th
Engineering, Physical Science, Physics
Also included in: Forces, Motion, and Newton's Laws Labs Bundle
STEM Foundations: Explicit Skill-Building Lesson Sequence with Resources
STEM Foundations is a ready-to-teach lesson sequence that explicitly builds the core skills students need before starting STEM projects. This package includes 8 structured lessons that teach students how to: Work effectively in groups Manage time during challenges Solve problems through testing and refinement Present ideas clearly Every lesson is fully planned, resourced, timed, and supported with teacher slides and student portfolio template, reducing planning time and increasing student a
5th - 8th
Computer Science - Technology, Engineering, Other (Science)
CCSS, NGSS
CCRA.W.4
, CCRA.W.6
, CCRA.W.7
+15
RA 14.9 Digital Twins & Virtual Simulation
RA 14.9 Digital Twin Engineering: Modeling, Simulation & Optimization STEM • CTE • Engineering Design • NGSS AlignedExplore one of the most powerful technologies shaping the future of engineering. In this lesson, students investigate how Digital Twin Engineering combines real-world data, virtual simulations, sensors, and predictive analytics to model, test, monitor, and optimize complex systems.Students analyze how engineers use digital twins to improve decision-making, reduce costs, increase ef
7th - 10th
Computer Science - Technology, Engineering, General Science
NGSS
HS-ETS1-2
, MS-ETS1-4
, HS-ETS1-4
Robert Goddard STEM Toolkit
The Estes Robert Goddard STEM Toolkit PDF is a ready‑to‑use classroom resource that connects students to the history and science of rocketry through activities inspired by Robert Goddard, the pioneer of modern rocketry. It combines history, science, and hands‑on challenges to help students: Learn about Goddard’s life and innovations, including his work with liquid‑fueled rockets that laid the foundation for space exploration. Engage with reading, writing, and critical thinking through a quiz a
3rd - 12th
Engineering, General Science, U.S. History
CCSS, NGSS
W.3.3
, W.4.3
, W.5.3
+22
RA 12.2 Medical Robotics & Healthcare Technology
RA 12.2 Medical Robotics & Healthcare Technology Surgical Robotics, Rehabilitation Systems & Biomedical Engineering Complete STEM / CTE Robotics Engineering Lesson NGSS • CTE • CAS • TEKS • NYSSLS • Florida B.E.S.T. • CCSS AlignedExplore How Robotics Is Transforming Modern HealthcareHealthcare is experiencing one of the most significant technological revolutions in human history. Engineers, doctors, researchers, and software developers are working together to create advanced robotic systems that
7th - 10th
Computer Science - Technology, Engineering, General Science
NGSS
MS-ETS1-2
, HS-ETS1-2
, HS-ETS1-3
+1
Showing 1-24 of 150+ results
TPT is the largest marketplace for PreK-12 resources, powered by a community of educators.
IXL family of brands