Percent Increase and Decrease Quiz
200+ results
Filters
Grade
Subject
Format
Resource type
Standard
Theme
Language
Programs & methods
Supports
EtherChannel | CCNA 200-301 Prep and Networking Lessons
This lesson is on EtherChannel. Ideal for ICT, Computer Science, Networking, or certification prep (CCNA, CCNP, or CompTIA Network+), it explains how EtherChannel combines multiple physical links into one logical connection, increasing bandwidth, redundancy, and reliability between network devices while simplifying management and configuration. Things we’ll coverWhat is EtherChannel? What problems does it solve?Configuring Layer 2/Layer 3 EtherChannels◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ Formats Provide
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in: The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
Working Lung Model Engineering Lab — Boyle's Law & Breathing
This lab uses the principles of Boyle’s Law to demonstrate how the human body manipulates air pressure to sustain life. It is one of the most effective ways to visualize a process that happens internally and invisibly every few seconds. Activity DescriptionThe Working Lung Model is a physical simulation of the thoracic cavity. By pulling on the bottom balloon (the diaphragm), students increase the volume inside the cup (the chest). This creates a vacuum (low pressure), forcing outside air to
5th - 9th
Anatomy, Biology, Engineering
Also included in: Human Body Systems Bundle
Robot Memory Counter | Interactive Logic & Game Systems | Micro:bit Simulator
🚀 Activity 3/5 – Cluster 4: Interactive Logic & Game Systems ✔ No hardware required — uses the free Microsoft MakeCode micro:bit simulator ✔ No prior coding experience required ✔ Step-by-step guided lesson ✔ Designed for classroom success 🤖 Robot Memory Counter | Micro:bit Coding Activity | Interactive Logic Systems | STEM Lesson (Grades 4–7)🌟 THIRD ACTIVITY in Cluster 4 – BUILD MEMORY-BASED ROBOT SYSTEMS In this engaging micro:bit coding activity, students take the next step in robotics
4th - 7th
Computer Science - Technology, Engineering, Robotics
NGSS
MS-ETS1-4
, 3-5-ETS1-1
, MS-ETS1-1
+1
Bobsled Drag Design Challenge: Aerodynamics, Graphing & Percent Change (6-8)
👉 This activity is part of the Winter Olympics STEM Bundle. Grab the full unit and save $4.25Bobsled Drag Design Challenge (Grades 6–8) Your students are about to do real engineering, the kind that makes them forget to ask, “Is this graded?” In this Winter Olympics inspired STEM challenge, teams design a cardstock bobsled shell to reduce aerodynamic drag, then run a simple pull test to collect data, graph results, calculate percent change, and defend the best design using CER (Claim, Evide
6th - 8th
Engineering, Graphing, Other (Science)
CCSS, NGSS
6.SP.B.4
, 6.SP.B.5
, 6.RP.A.3
+7
SCIENCE ~ SIMPLE MACHINE PROJECT, REVIEW SHEET & QUIZ
***EDITABLE & PDF!!!*** 11 Pages SIMPLE MACHINES PROJECT, STUDY SHEET & QUIZ Adapt to meet your class' grade level. Step-by-Step Project: After mastering the basics, students use a guided booklet to collaborate with peers and families to design a compound machine to be built at home.Interactive Gallery Walk: Celebrate student inventions with a classroom showcase! Students provide focused peer feedback using "Stars and Wishes" on sticky notes for two peers they are assigned to.Assessment Ready: W
3rd - 5th
Engineering, Informational Text, Other (Science)
Electricity & Electromagnets: Circuits, Conductors, Series/Parallel + Quizzes
Make teaching electricity and magnetism simple and engaging with this hands-on resource! Perfect for Grades 4–6, this package introduces students to electricity, simple circuits, conductors and insulators, series vs. parallel circuits, and electromagnets in a clear and accessible way. To run the experiments, students will need: a battery, wires with clips, small light bulbs, a switch (optional), various test materials (metal/plastic/wood), an iron nail, and copper wire. Students build real circu
4th - 6th
Engineering, General Science, Physics
Bridge Building STEAM Challenge | Engineering Design & Forces Project
Bring real-world engineering into your classroom with this engaging STEAM Bridge Building Challenge Project. This hands-on STEAM design task guides students through the full engineering design process: plan → design → build → test → reflect, helping them think like real engineers. Students investigate how forces such as compression and tension act on structures, explore different bridge types (beam, arch, truss, suspension), and apply scientific knowledge to design and construct a bridge capabl
7th - 10th
Engineering, General Science, Physics
Renewable vs Nonrenewable Energy Unit 3rd Grade | STEM NGSS Quiz
Renewable vs Nonrenewable Energy Unit – 3rd Grade ScienceStart your school year strong with this complete Renewable vs Nonrenewable Energy Unit designed for 3rd Grade NGSS science standards. This Back to School science unit includes lesson plans, reading passages, STEM activities, assessments, and a grading rubric, everything you need for a structured, print-and-go energy unit. Perfect for:• Beginning of Year Science • First Month of School • Natural Resources Unit • STEM Integration • Science +
3rd
Engineering, Informational Text, Physical Science
CCSS, NGSS
RI.3.1
, RI.3.2
, RI.3.3
+4
STP (Spanning Tree Protocol) Part 2 | CCNA 200-301 Prep and Networking Lessons
This lesson is on Spanning Tree Protocol (STP) – Part 2. Ideal for ICT, Computer Science, Networking, or certification prep (CCNA, CCNP, or CompTIA Network+), it covers advanced STP concepts including STP states and timers, Bridge Protocol Data Units (BPDUs), optional STP features, and STP configuration. Learners will understand how STP maintains a loop-free network, optimizes convergence, and can be fine-tuned for greater network efficiency and stability. ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ Things
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in: The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
OSPF Part 2 | CCNA 200-301 Prep and Networking Lessons
This lesson is on Open Shortest Path First (OSPF) – Part 2. Ideal for ICT, Computer Science, Networking, or certification prep (CCNA, CCNP, or CompTIA Network+), it covers the OSPF metric (cost), the process of forming OSPF neighbor relationships, and advanced OSPF configuration. Students will learn how routers establish OSPF adjacencies, calculate the best path using cost values, and apply configurations that optimize routing performance and network stability. ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ Thin
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in: The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
Introduction to OSPF Part 1 | CCNA 200-301 Prep and Networking Lessons
This lesson is on Open Shortest Path First (OSPF) – Part 1. Ideal for ICT, Computer Science, Networking, or certification prep (CCNA, CCNP, or CompTIA Network+), it covers basic OSPF operations, an introduction to OSPF areas, and fundamental OSPF configuration. Students will learn how OSPF enables efficient dynamic routing, organizes networks using hierarchical areas, and is implemented on routers for scalable, reliable network communication. ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ Things we’ll coverBasic
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in: The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
Extended Access Control Lists | CCNA 200-301 Prep and Networking Lessons
This lesson is on Extended Access Control Lists (ACLs). Ideal for ICT, Computer Science, Networking, or certification prep (CCNA, CompTIA Security+, Network+, or CCNP), it explains how Extended ACLs are used to filter and control network traffic with precision, allowing administrators to permit or deny packets based on source and destination IP addresses, protocols, and port numbers for enhanced network security and traffic management. ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ Things we’ll coverAnother way t
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in: The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
Layer 2 Discovery Protocols (CDP & LLDP) | CCNA 200-301 Prep
This lesson is on Layer 2 Discovery Protocols (CDP & LLDP). Ideal for ICT, Computer Science, Networking, or certification prep (CCNA, CompTIA Network+, or CCNP), it explains how Cisco Discovery Protocol (CDP) and Link Layer Discovery Protocol (LLDP) enable devices to automatically share and identify neighboring device information, helping network administrators map, monitor, and troubleshoot network topologies efficiently. ◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆◇◆ Things we’ll coverIntro to Layer 2 discover
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
Also included in: The Ultimate CCNA & Networking BUNDLE [ From Zero to Network Pro ]
Roller Coaster Project - Energy, Force, and Motion
Students explore energy, force, motion, potential energy, kinetic energy, gravity, friction, unbalanced and balanced forces with this project based learning activity. Includes a reading passage, flash cards, a quiz quick check, project build day guideline, and draft page for a roller coaster.
1st - 12th
Engineering, General Science, Physics
Maglev Technology Quiz
Magnetic LevitationQuiz (Beginner Level)Great beginner quiz when introducing Maglev Technology This is a 10 question quiz covering the very basics of magnetic levitation. This is a perfect quiz to add to our Maglev Technology Project or Maglev Technology Packet. PDF includes: (1) 2-sided Quiz (1) Answer Ke All Answer Keys Included. (Most of these worksheets are student specific so answers (sketches) will vary) Tested for 8th graders after reading and reviewing the Maglev Technology Packet. Magle
5th - 9th
Engineering
Also included in: Maglev Unit Enhancement Bundle
Architecture Quiz
This is a 10 question Architecture Quiz covering many aspects of the Architectural Unit available in our store. It is based on reading a simple floor plan and answering questions about symbols, square footage, square yardage and measurements. Answer Key provided. Architecture Unit and other Architecture worksheets available in our store. Click the link to explore more: https://www.teacherspayteachers.com/store/the-creative-steam-zoneQuestions or comments welcome at thecreativesteamzone@protonma
7th - 12th, Adult Education
Engineering, Geometry, Visual Arts
Also included in: Architecture: Bedroom Design Unit Mega-Bundle
PLTW Automation Robotics Flash Cards
Hardware and Gear Flashcards for PLTW Automation Robotics. 20 flashcards. Allows students to review materials prior to building. Group study before a quiz. Bell Ringer activity before starting a new build. VEX based.
6th - 8th
Computer Science - Technology, Engineering, Robotics
STEM Challenge Cards – 48 Hands-On Engineering Projects for Middle School
Bring creativity and problem-solving to life with this set of 48 STEM Challenge Cards designed for upper elementary and middle school students! Each challenge invites students to think like engineers — designing, testing, and improving their builds using everyday materials. These low-prep, high-engagement activities are perfect for fostering collaboration, critical thinking, and real-world engineering skills. Each Challenge Card Includes: Goal: A clear objective to guide student work. Numbere
4th - 8th
Engineering, General Science, Other (Science)
NGSS
MS-ETS1-2
, 3-5-ETS1-3
, MS-ETS1-4
+4
Sustainable Design Practices - Tier Rating Activity
Have students analyse design practices and rate their sustainability. S tier rating systems require very little explanation due to their prevalence in popular culture, so students can focus on the design decisions themselves. Some tricky ones included for the challenge. Resource includes prompts which hold value in all pillars of sustainable design - social, ecological, economical. All in all a good revision/formative assessment activity.
9th - 12th
Engineering, Other (Arts), Vocabulary
Submarine Density Engineering Lab — Ballast Tank Design
This engineering challenge takes the complex physics of buoyancy and turns it into a hands-on mechanical system. By manipulating air volume with a syringe, students act as "ballast control officers," gaining a concrete understanding of how density dictates whether an object defies or succumbs to gravity in a fluid. Activity DescriptionBuild a Submarine is a premier STEM engineering lab that focuses on Archimedes' Principle and Density Control. Unlike static sink-or-float activities, this lab r
5th - 12th
Engineering, Physical Science, Physics
Also included in: Scientific Method and Measurement Skill Labs Bundle
3D Winter Art: Q-Tip Snowflakes | STEAM Lesson on Radial Balance
This fun 1 day, low-prep ART lesson teaches radial balance and 6-sided symmetry through a hands-on building snowflake craft activity that includes visual guided Google Slides, along with a printable exit quiz. This Radial Balance Snowflake STEAM - ART lesson teaches students the principles of radial balance symmetry and 3D sculpture while integrating a fascinating science video about how crystals form in nature. Using only Q-tips, glue, and a dash of glitter, your students will create stunnin
2nd - 9th
Engineering, Environment, Visual Arts
Viewing Guide: Animatronics
This activity was designed with 8th-grade Middle School students in mind as a way to activate and increase their background knowledge on the topic of Animatronics, as well as their scientific vocabulary in this field. It can easily be adapted to a 6th-grade group by reducing its length and complexity by half (ie. include only two parts, A and B, instead of three; cut down the number of blanks to 10-11, instead of 22). For a 7th-grade class, I would recommend finding a middle ground. Studen
6th - 8th
Engineering, Visual Arts, Vocabulary
Materials Science Unit Lesson 3
Student-Ready Materials:Student-Facing Slides"The Story of Plastics" DocumentaryStudy Guides for "The Magic of Ceramics"Lab DirectionsStudent Lab HandoutStudent QuizExample KWLD ChartSuggested Classroom Routines and Activities:Socratic Science Circle: A method for exploring and analyzing text/media through questioning and answering, with inner and outer circles providing feedback and switching roles.KWLD Chart: (Know, Want to know, Learned, Done) A chart for organizing information about recyclin
9th - 12th
Chemistry, Engineering, General Science
Pi-Day Catapult — Optimize Angle & Tension (Predict vs. Measure) | MS–HS NGSS
Description (NGSS included) Celebrate Pi-Day with a data-driven projectile challenge! Students tune angle and tension on a simple launcher, then predict vs. measure range and compute percent error. Teams graph Range vs. Angle (and optional Range vs. Pullback) and explain results with CER. 🧠📈 🔬 Investigate: hold one variable constant to fairly test the other. 🧮 Model: use a calibration shot or R ≈ (v²·sin(2θ))/g to predict. 📊 Analyze: compare predicted vs. measured; percent error
3rd - 12th
Engineering, General Science, Physics
Showing 1-24 of 200+ results
TPT is the largest marketplace for PreK-12 resources, powered by a community of educators.
IXL family of brands