Percent Increase and Decrease Quiz
61+ results
Filters
Grade
Subject
Format
Resource type
Standard
Language
Programs & methods
Supports
Working Lung Model Engineering Lab — Boyle's Law & Breathing
This lab uses the principles of Boyle’s Law to demonstrate how the human body manipulates air pressure to sustain life. It is one of the most effective ways to visualize a process that happens internally and invisibly every few seconds. Activity DescriptionThe Working Lung Model is a physical simulation of the thoracic cavity. By pulling on the bottom balloon (the diaphragm), students increase the volume inside the cup (the chest). This creates a vacuum (low pressure), forcing outside air to
5th - 9th
Anatomy, Biology, Engineering
Also included in: Human Body Systems Bundle
SCIENCE ~ SIMPLE MACHINE PROJECT, REVIEW SHEET & QUIZ
***EDITABLE & PDF!!!*** 11 Pages SIMPLE MACHINES PROJECT, STUDY SHEET & QUIZ Adapt to meet your class' grade level. Step-by-Step Project: After mastering the basics, students use a guided booklet to collaborate with peers and families to design a compound machine to be built at home.Interactive Gallery Walk: Celebrate student inventions with a classroom showcase! Students provide focused peer feedback using "Stars and Wishes" on sticky notes for two peers they are assigned to.Assessment Ready: W
3rd - 5th
Engineering, Informational Text, Other (Science)
Electricity & Electromagnets: Circuits, Conductors, Series/Parallel + Quizzes
Make teaching electricity and magnetism simple and engaging with this hands-on resource! Perfect for Grades 4–6, this package introduces students to electricity, simple circuits, conductors and insulators, series vs. parallel circuits, and electromagnets in a clear and accessible way. To run the experiments, students will need: a battery, wires with clips, small light bulbs, a switch (optional), various test materials (metal/plastic/wood), an iron nail, and copper wire. Students build real circu
4th - 6th
Engineering, General Science, Physics
Bridge Building STEAM Challenge | Engineering Design & Forces Project
Bring real-world engineering into your classroom with this engaging STEAM Bridge Building Challenge Project. This hands-on STEAM design task guides students through the full engineering design process: plan → design → build → test → reflect, helping them think like real engineers. Students investigate how forces such as compression and tension act on structures, explore different bridge types (beam, arch, truss, suspension), and apply scientific knowledge to design and construct a bridge capabl
7th - 10th
Engineering, General Science, Physics
Maglev Technology Quiz
Magnetic LevitationQuiz (Beginner Level)Great beginner quiz when introducing Maglev Technology This is a 10 question quiz covering the very basics of magnetic levitation. This is a perfect quiz to add to our Maglev Technology Project or Maglev Technology Packet. PDF includes: (1) 2-sided Quiz (1) Answer Ke All Answer Keys Included. (Most of these worksheets are student specific so answers (sketches) will vary) Tested for 8th graders after reading and reviewing the Maglev Technology Packet. Magle
5th - 9th
Engineering
Also included in: Maglev Unit Enhancement Bundle
Architecture Quiz
This is a 10 question Architecture Quiz covering many aspects of the Architectural Unit available in our store. It is based on reading a simple floor plan and answering questions about symbols, square footage, square yardage and measurements. Answer Key provided. Architecture Unit and other Architecture worksheets available in our store. Click the link to explore more: https://www.teacherspayteachers.com/store/the-creative-steam-zoneQuestions or comments welcome at thecreativesteamzone@protonma
7th - 12th, Adult Education
Engineering, Geometry, Visual Arts
Also included in: Architecture: Bedroom Design Unit Mega-Bundle
Submarine Density Engineering Lab — Ballast Tank Design
This engineering challenge takes the complex physics of buoyancy and turns it into a hands-on mechanical system. By manipulating air volume with a syringe, students act as "ballast control officers," gaining a concrete understanding of how density dictates whether an object defies or succumbs to gravity in a fluid. Activity DescriptionBuild a Submarine is a premier STEM engineering lab that focuses on Archimedes' Principle and Density Control. Unlike static sink-or-float activities, this lab r
5th - 12th
Engineering, Physical Science, Physics
Also included in: Scientific Method and Measurement Skill Labs Bundle
Bottle Cap Project in Onshape: Complete CAD Lesson with Teacher Resources
This is a beginner-to-intermediate CAD project where learners design a realistic Fanta Orange bottle cap in Onshape. It includes a step-by-step project guide, a teacher’s guide with pacing and built-in checks, a student quiz with answer key, poster-style visuals, and classroom-ready cheat sheets. Students will model the ridged edges that give the cap strength and grip, loft smooth transitions between profiles, shell the cap for lightweight functionality, and apply a branded decal for an authenti
5th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Robotics
Lofted Vase Project in Onshape: Complete CAD Lesson with Teacher Resources
This is a beginner-friendly CAD project where students design, loft, and shell a geometric vase using Onshape. It includes a step-by-step project guide, a comprehensive teacher’s guide with instructional support and built-in formative checks, a student quiz with answer key, a direct link to the Onshape file, and more. The project is designed to mirror how professional designers think: students learn to define geometry with constraints, structure their design using offset planes, and generate for
6th - 12th
Computer Science - Technology, Engineering, Robotics
Matter Detectives: Exploring Material Properties (Alberta 2024 Science aligned)
"Matter Detectives: Exploring Material Properties" brings the excitement of material science to your Grade 2 classroom! Aligned with the NEW 2024 Alberta Science Curriculum for Grade 2, this resource guides students through the fascinating world of materials and their properties. Students begin by defining and categorizing materials, then take on the role of material engineers to test various materials. Through hands-on investigations, they’ll discover properties like malleability, reflectivit
2nd - 4th
Engineering, General Science, Physical Science
NGSS
K-2-ETS1-2
, K-2-ETS1-3
, 2-PS1-1
+2
2x4 Brick Project in Onshape: Complete CAD Lesson with Teacher Resources
This is a beginner-friendly CAD project where learners model a classic 2×4 brick in Onshape—then level up with an advanced 4×4 plate challenge. The resource includes a step-by-step project guide, a teacher’s guide with pacing and checks for understanding, a student quiz with answer key, poster-style visuals, and classroom-ready cheat sheets. Students practice professional habits: sketching with constraints, patterning repeated features, shelling for realistic wall thickness, and mirroring for
5th - 12th, Adult Education, Higher Education
Engineering, Physics
STEM Investigation – Falling Cones & Aerodynamics
Title: 💡 STEM Investigation – Falling Cones Summary: Students explore how mass and cone shape affect falling speed by dropping paper circles and cones from a consistent height. They test flat circles, standard cones (~100°), double cones, and cones with wide (~20°) and narrow (~260°) angles. Observations show that flat circles fall slowest due to high air resistance, standard cones fall faster, double cones fall fastest due to increased mass, and cone angle affects drag—narrow cones fall quick
6th - 10th
Engineering, Physical Science, Physics
Also included in: Forces, Motion, and Newton's Laws Labs Bundle
Rube Goldberg Project Based Learning Engineering Design & Critical Thinking
Bring creativity, logic, and engineering together with this Rube Goldberg Project-Based Learning Challenge for grades 4–6! Students will dive into the fascinating world of Rube Goldberg, an inventor and cartoonist famous for his comically complicated machines that perform simple tasks. This engaging 2+ hour activity encourages students to think outside the box, analyze inventions, and design their own Rube Goldberg machine inside a head. Perfect for independent work, whole-class learning, ce
4th - 6th
Close Reading, Engineering, Science
CCSS, NGSS
RI.4.3
, RI.5.3
, RI.6.3
+9
Physics and Engineering Project Bundle
Here are all the projects that I do with my Regular, Honors, and AP Students. Each project comes with worksheets that are differentiated depending on your level of student. Each of these projects can be done without any calculations, however it was intentionally made for students that have a basic understanding of physics, algebra, and geometry. Every year these are the projects I provide to my students who often tell me that physics has become their new favorite class! Here is the Material and
9th - 12th, Higher Education
Engineering, Physics, Science
NGSS
HS-PS2-2
, HS-PS3-1
, HS-PS2-1
+1
STEM Theme Day Classroom Unit | Hands-On Activities, Challenges, and Experiments
This STEM Challenge Unit is packed with hands-on activities that will get your students building, testing, and thinking like engineers. Designed for one to two days of exploration, it is low prep and uses common classroom materials such as popsicle sticks, glue, paper, and straws. It is easy to implement anytime you want to bring STEM to life in your classroom. What’s Included?8 Low-Prep STEM Challenges with clear directions, examples, and engaging hands-on learning experiences.Student STEM Jour
1st - 3rd
Engineering, Reading, Writing
CCSS, NGSS
1.MD.A.1
, 1.MD.C.4
, 2.MD.A.4
+14
Plant STEM Activities | Edible Parts of a Plant Model & Building STEM Snack K-2
Looking for a meaningful, hands-on way to teach plants that your students will actually remember? This Plant STEM Snack pack combines real science, engineering, and edible learning into two engaging activities your students will LOVE. Students don’t just learn about plants… they build them, explore them, and think about how they actually work. This resource includes TWO highly engaging STEM snack activities that are simple to prep, easy to use, and packed with real learning. 🌿 What’s Include
K - 3rd
Biology, Engineering
Middle School STEM Engineering Curriculum | Forces, Energy & Motion
Bring engineering to life in your classroom with this complete 5-week STEM curriculum!Pathway 1: Forces, Energy, & Motion introduces students to the Engineering Design Process through nine engaging, hands-on investigations where they predict, test, analyze, reflect, and improve real engineering designs.Students will explore how forces affect motion, investigate energy and friction, and design structures that resist forces while developing critical thinking, collaboration, and problem-solving ski
5th - 8th
Engineering, Graphing, Physics
NGSS
MS-ETS1-2
, MS-ETS1-4
, MS-PS2-2
+3
Ultimate Habitat Bundle | K-2 Science, STEM & Habitat Activities
Bring science, engineering, and creativity into your classroom with this comprehensive Ultimate Habitat Bundle! This bundle includes 10 complete habitat resources that help students explore habitats, plants, animals, adaptations, survival, engineering, and environmental problem solving through hands-on and engaging learning experiences. Students will design, build, test, research, write, draw, label, and explain as they learn about five exciting habitats through interactive STEM challenges,
K - 2nd
Engineering, Environment
FREE Space Rocket Origami | Easy Astronomy Craft & STEM Activity with NO PREP
3... 2... 1... Blast off into creativity! Introduce your students to the art of paper folding with this beginner-friendly Origami Rocket project. This isn't just a folding exercise—it’s an engineering challenge that doubles as a unique space-themed coloring activity.From Katie ClemonsWith over 800,000 journals sold, I love finding ways to help kids make things with their own two hands. I designed this freebie to bridge the gap between STEM and Art. Folding origami requires focus, precision, and
K - 5th
Astronomy, Engineering, Science
Arduino Intermediate STEM Curriculum | 4-Week Arduino Unit | Coding&Engineering
Arduino Intermediate STEM Curriculum | 4-Week Arduino Unit | Coding & EngineeringBring hands-on coding and engineering into your classroom with this comprehensive Arduino Intermediate STEM Curriculum designed for students in Grades 5–8. This classroom-ready resource helps students move beyond beginner Arduino skills and explore more advanced concepts through engaging STEM projects, coding challenges, engineering design activities, and real-world problem solving. Students will build, code, test
5th - 9th
Computer Science - Technology, Engineering, Robotics
CCSS, NGSS
6.EE.B.6
, 7.EE.B.4
, 6.RP.A.3
+8
Complete C Programming Lesson on Loops, Arrays & Strings with Examples
This Curriculum provides a complete, student-friendly walkthrough of loops, control flow, break/continue behavior, arrays, multidimensional arrays, strings, and essential string functions in C. Perfect for ICT, Computer Science, Programming Fundamentals, Software Engineering basics, and CS1-level courses. Each lesson includes clear explanations, step-by-step examples, full C code, flowcharts, diagrams, array memory layouts, and practical applications, helping learners truly understand how loops
9th - 12th, Adult Education, Higher Education
Computer Science - Technology, Engineering, Instructional Technology
STEM & Science Project Bundle | Project-Based Learning for 4th and 5th grade
🚀 Inspire the next generation of innovators, problem-solvers, and changemakers with this exciting STEM & Science Project Bundle! 🌎🤖🪐This engaging bundle combines THREE high-interest, hands-on projects that get students thinking critically, designing creatively, and applying real-world science skills in meaningful ways. Perfect for 4th and 5th grade classrooms, these activities are designed to keep students motivated while making science fun, interactive, and memorable!Students will: • ✨
4th - 5th
Engineering, Environment, General Science
NGSS
4-PS3-4
, 5-ESS1-1
, 5-LS2-1
+5
Civil Engineering & Infrastructure | Bridges, Cities & Design STEM PBL BUNDLE
Explore civil engineering, infrastructure, bridges, cities, and design systems with this comprehensive STEM workbook bundle for Grades 5–8. This engineering lesson set includes engaging activities and worksheets covering construction, transport systems, and urban development.Students will investigate how infrastructure is planned, built, and maintained while analyzing real-world structures such as bridges, water treatment plants, and cities. Through modeling, problem-solving tasks, and struct
5th - 9th
Chemistry, Engineering, Physics
CCSS, NGSS
RST.6-8.1
, RST.6-8.2
, RST.6-8.8
+8
PBL Shirt Store Brand and 3D Printing Hoodie Charm Companion Project BUNDLE
Shirt Brand Design & Branding STEM + Entrepreneurship Bundle – Tinkercad & PBL ActivityLooking for a hands-on, engaging way to teach 3D design, branding, and entrepreneurship? This Shirt Design & Business Bundle combines STEM skills, creativity, and real-world business concepts, making it perfect for upper elementary and middle school students! What’s Included:3D Hoodie Charm Tinkercad Project – Students design a customized hoodie charm in Tinkercad that fits on a sweatshirt string and follows a
5th - 9th
Computer Science - Technology, Engineering, Graphic Arts
NGSS
MS-ETS1-2
, HS-ETS1-2
, 3-5-ETS1-3
+8
Showing 1-24 of 61+ results
TPT is the largest marketplace for PreK-12 resources, powered by a community of educators.
IXL family of brands