Technology and Engineering
81 Followers
Spearfish, South Dakota, United States
About the store
I have been teaching in the classroom for 12 years, I have taught adults in industry for over 25 years.
Read more
Store categories
All resources
Filters
Grade
Subject
Format
Standard
Audience
Engineering Process Unit Bundle **EIGHT PROJECTS**
These projects are designed to engage students in a fun engineering projects while learning the process of engineering. It includes all of the resources (lesson plan, rubric/checklist handout, research handout, design brief, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes.All of my engineering products are designed to enable students to choose a project that interests them. Each product has the same format and process but the content
6th - 12th, Adult Education
Other (Arts)
NGSS
MS-ETS1-2
, MS-ETS1-4
, MS-ETS1-1
 +1
Manufacturing Process Unit Bundle ** SIX PROJECTS**
These projects are designed to engage students in a fun woodworking project while learning the process of manufacturing. It includes all of the resources (lesson plan, rubric/checklist handout, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes.All of my woodworking products are designed to enable students to choose a project that interests them. Each product has the same format and process but the content is unique to the project. This
6th - 12th, Adult Education
Other (Arts)
Engineering Projects Shop Bundle **FOUR PROJECTS** Machines Required
These projects are designed to engage students in a fun engineering projects while learning the process of engineering. This bundle was created for the engineering classroom that does has woodworking equipment. It includes all of the resources (lesson plan, rubric/checklist handout, research handout, design brief, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes. These projects are also included in the Unit Bundle.All of my engineer
6th - 12th, Adult Education
Other (Arts)
NGSS
MS-ETS1-2
, MS-ETS1-4
, MS-ETS1-1
 +1
Engineering Projects Classroom Bundle **FOUR PROJECTS** No machines Required
These projects are designed to engage students in a fun engineering projects while learning the process of engineering. This bundle was created for the engineering classroom that does not have woodworking equipment. It includes all of the resources (lesson plan, rubric/checklist handout, research handout, design brief, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes. These projects are also included in the Unit Bundle.All of my eng
6th - 12th, Adult Education
Other (Arts)
NGSS
MS-ETS1-2
, MS-ETS1-4
, MS-ETS1-1
 +1
Manufacturing Process Project Bundle (Bird House)
These projects are designed to engage students in a fun woodworking project while learning the process of manufacturing. It includes all of the resources (lesson plan, rubric/checklist handout, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes.All of my woodworking products are designed to enable students to choose a project that interests them. Each product has the same format and process but the content is unique to the project. This
6th - 12th, Adult Education
Other (Arts)
Manufacturing Process: Lesson Bundle (Super Clip)
These projects are designed to engage students in a fun woodworking project while learning the process of manufacturing. It includes all of the resources (lesson plan, rubric/checklist handout, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes.All of my woodworking products are designed to enable students to choose a project that interests them. Each product has the same format and process but the content is unique to the project. This
5th - 12th, Adult Education
Other (Arts)
Electricity and Mechanical Movement-Simple Motor Project
Students will learn about the relationship between electricity and mechanical movement by creating, testing and evaluating one or more technology projects. Students will use the worksheet provided to demonstrate their knowledge of the relationship between mechanical movement and electricity. This product includes all of the resources (lesson plan, rubric/checklist handout, build video and the electromagnetic rotation worksheet handout for the Simple Motor) and are designed to give teachers and
6th - 12th, Adult Education
Other (Arts)
NGSS
MS-ETS1-4
, MS-PS2-3
, MS-PS2-5
Manufacturing Process Project: Super Clip Procedures
This project includes build instructions in a student friendly format for a note holder (texting 1.0). The purpose of the project is to learn the manufacturing process by building a woodworking project. It is assumed that the student has prior knowledge of woodworking tools and shop safety.
5th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process: Lesson Bundle (Super Clip)
Manufacturing Process Project: Boot Jack Lesson Plan
This project includes a lesson plan for a note holder. The lesson plan is based on ITEEA standards and essential skills. The purpose of the project is to learn the manufacturing process by building a woodworking project. It is assumed that the student has prior knowledge of woodworking tools and shop safety. Many of the products are currently aligned with ITEEA Third Edition Standards for Technological Literacy. New revised ITEEA standards are coming soon.
5th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process Project Bundle (Boot Jack)
Manufacturing Process Project: Key Holder Procedures
This project includes build instructions in a student friendly format for a bird house. The purpose of the project is to learn the manufacturing process by building a woodworking project. It is assumed that the student has prior knowledge of woodworking tools and shop safety.
6th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process Project Bundle (Key Holder)
Manufacturing Process Project: Note Holder Lesson Plan
This project includes a lesson plan for a note holder. The lesson plan is based on ITEEA standards and essential skills. The purpose of the project is to learn the manufacturing process by building a woodworking project. It is assumed that the student has prior knowledge of woodworking tools and shop safety. Many of the products are currently aligned with ITEEA Third Edition Standards for Technological Literacy. New revised ITEEA standards are coming soon.
5th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process: Lesson Bundle (Note Holder)
Manufacturing Process Birdhouse Checklist/Rubric
This project is designed to teach the manufacturing process by enabling students to create a woodworking project. The project assumes that the student has prior knowledge in the use and safety of woodworking tools, as well as measuring using a common ruler. Many of the products are currently aligned with ITEEA Third Edition Standards for Technological Literacy. New revised ITEEA standards are coming soon.
6th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process Project Bundle (Bird House)
Manufacturing Process Project Bundle (Boot Jack)
These projects are designed to engage students in a fun woodworking project while learning the process of manufacturing. It includes all of the resources (lesson plan, rubric/checklist handout, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes.All of my woodworking products are designed to enable students to choose a project that interests them. Each product has the same format and process but the content is unique to the project. This
6th - 12th, Adult Education
Other (Arts)
Manufacturing Process Project Bundle (Key Holder)
These projects are designed to engage students in a fun woodworking project while learning the process of manufacturing. It includes all of the resources (lesson plan, rubric/checklist handout, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes.All of my woodworking products are designed to enable students to choose a project that interests them. Each product has the same format and process but the content is unique to the project. This
6th - 12th, Adult Education
Other (Arts)
Manufacturing Process Project Bundle (Clock)
These projects are designed to engage students in a fun woodworking project while learning the process of manufacturing. It includes all of the resources (lesson plan, rubric/checklist handout, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes.All of my woodworking products are designed to enable students to choose a project that interests them. Each product has the same format and process but the content is unique to the project. This
6th - 12th, Adult Education
Other (Arts)
Manufacturing Process: Lesson Bundle (Note Holder)
These projects are designed to engage students in a fun woodworking project while learning the process of manufacturing. It includes all of the resources (lesson plan, rubric/checklist handout, and build procedures. All of the resources are aligned to assist students to stay on track and reduce mistakes.All of my woodworking products are designed to enable students to choose a project that interests them. Each product has the same format and process but the content is unique to the project. This
5th - 12th, Adult Education
Other (Arts)
Manufacturing Process Lesson Plan (Bird House)
This project is designed to teach the manufacturing process by enabling students to create a woodworking project. The project assumes that the student has prior knowledge in the use and safety of woodworking tools, as well as measuring using a common ruler. Many of the products are currently aligned with ITEEA Third Edition Standards for Technological Literacy. New revised ITEEA standards are coming soon.
6th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process Project Bundle (Bird House)
Manufacturing Process Project: Rubric and Checklist (Super Clip)
This project includes a grading rubric and checklist in a student friendly format for a note holder. The checklist helps to keep the students on track and enables the teacher to see problems before the student moves on. The purpose of the project is to learn the manufacturing process by building a woodworking project. It is assumed that the student has prior knowledge of woodworking tools and shop safety. Many of the products are currently aligned with ITEEA Third Edition Standards for Technolo
5th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process: Lesson Bundle (Super Clip)
Manufacturing Process Lesson Plan (Super Clip)
This project is designed to teach the manufacturing process by enabling students to create a woodworking project. The project assumes that the student has prior knowledge in the use and safety of woodworking tools, as well as measuring using a common ruler. Many of the products are currently aligned with ITEEA Third Edition Standards for Technological Literacy. New revised ITEEA standards are coming soon.
6th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process: Lesson Bundle (Super Clip)
Manufacturing Process Lesson Plan (Key Holder)
This project is designed to teach the manufacturing process by enabling students to create a woodworking project. The project assumes that the student has prior knowledge in the use and safety of woodworking tools, as well as measuring using a common ruler. Many of the products are currently aligned with ITEEA Third Edition Standards for Technological Literacy. New revised ITEEA standards are coming soon.
6th - 12th, Adult Education
Other (Arts)
Also included in:Â Manufacturing Process Project Bundle (Key Holder)
Showing 1-20 of 31 results
About the store
Experience
I have been teaching in the classroom for 12 years, I have taught adults in industry for over 25 years.
Teaching style
One of the most useful things I learned as a first year teacher came from my principal and I have adopted it a one of my leading philosophies; if you provide students with a smorgasbord to chose from, they will feast on what they want. If you don't, they will feast on you! Providing voice and choice in learning enables students to connect their learning to their specific interests and all but eliminates unwanted classroom behaviors. Additionally, providing voice and choice and a clear pathway to success frees the teacher to focus on differentiation.
Also, by planning and executing, data driven, engaging lessons, students will not only advance in their skills, but be motivated learners. All students come to school with talents that need to be celebrated and respected. When students feel they belong, through kind and respectful interactions, they will succeed.
TPT is the largest marketplace for PreK-12 resources, powered by a community of educators.
IXL family of brands